Elevator Recall System Installation: What Building Owners Should Know

An elevator recall system connects a building’s fire alarm system to its elevator controls. When a designated fire alarm device activates, the elevator receives a signal to return to a designated floor according to the building’s approved sequence. This life-safety function must be planned, installed, and tested with the fire alarm and elevator systems working together.
For building owners and property managers in Los Angeles and surrounding communities, the project typically involves reviewing the building plans, coordinating qualified contractors, confirming permit requirements, and testing the complete system.

What Is an Elevator Recall System?
Elevator recall, also called Phase I Emergency Recall Operation, is an elevator response to certain fire alarm signals. It takes the elevator out of normal service and returns it to the designated floor as programmed for the building.
The specific devices, signals, and elevator response depend on the building’s design and applicable requirements. The California Building Code addresses elevator recall and emergency operation, while the applicable fire alarm requirements govern system design and testing. California Building Code, Chapter 30, 2025 California Fire Code, Chapter 9
What Happens During Installation?
1. The project team reviews the existing systems
The fire alarm and elevator contractors review the building’s plans, fire alarm equipment, elevator controls, and existing wiring. They identify the system functions and equipment involved and determine whether the existing equipment can support the planned work.
2. The design and permit path are confirmed
The team prepares the required plans and identifies which approvals or permits apply. Requirements depend on the project, building, and local authority having jurisdiction (AHJ). In Los Angeles, LAFD reviews fire and life-safety plans for applicable projects, including fire alarm systems. LAFD: Fire Life Safety Plan Review
3. The alarm and elevator interfaces are installed
Depending on the approved design, work may include installing or relocating fire alarm devices, adding interface equipment, connecting the fire alarm control unit to the elevator controller, and updating system programming.
The fire alarm contractor and elevator contractor coordinate their work so that the signal and elevator response match the approved sequence.
4. The complete sequence is tested
After installation, the team tests the initiating devices, fire alarm panel, interface, and elevator response against the approved design. The California Fire Code requires fire alarm systems and their components to be tested in accordance with NFPA 72 upon completion of installation. 2025 California Fire Code, Section 907.7
The owner should request test results, completion records, and updated system documents. Inspection requirements depend on the local AHJ and project scope.
Who Should Be Involved?
An elevator recall project often requires coordination among:
The building owner or property manager
A fire alarm contractor
The elevator contractor
The general or electrical contractor, when applicable
The local building or fire authority
Agree on who handles plans, permits, access, elevator scheduling, testing, and closeout documents before work begins.
What Building Owners Should Prepare
Before requesting a proposal, gather the fire alarm and elevator drawings, recent inspection or service reports, and any notices or deficiencies related to the systems. Identify the building contact who can coordinate access and approve work.
For occupied apartments, offices, and commercial buildings, plan communications with tenants and staff. Some work or testing may require scheduled access or temporary elevator interruptions.
Why Choose Cyber Shield Security?
Elevator recall installation depends on coordination between fire alarm equipment, elevator controls, building operations, and local approvals. Cyber Shield Security works with property owners, property managers, apartment building owners, HOAs, general contractors, developers, and business owners on fire alarm installation needs.
Cyber Shield Security serves Los Angeles and nearby communities, including North Hollywood, Studio City, Burbank, Sierra Madre, Arcadia, Pasadena, Woodland Hills, Sherman Oaks, Santa Monica, Beverly Hills, and West Hollywood. Contact the company to discuss your project and confirm the services available for your property.
Frequently Asked Questions
What does an elevator recall system do?
It connects designated fire alarm signals to elevator controls so the elevator follows a programmed emergency response, typically returning to a designated floor.
Is elevator recall the same as shutting off an elevator?
No. Recall generally means the elevator returns to a designated floor under Phase I Emergency Recall Operation. Other elevator functions may apply depending on the building’s design.
Who installs an elevator recall system?
A fire alarm contractor handles the fire alarm side, while an elevator contractor coordinates work involving the elevator controls. The project team should confirm responsibilities and scheduling.
Does elevator recall installation require a permit?
Permit and plan review requirements depend on the project and jurisdiction. Confirm the process with the AHJ before starting work.
Does the system need to be tested after installation?
Yes. The fire alarm and elevator interfaces should be tested against the approved design. Applicable inspection and documentation requirements depend on the AHJ and project scope.
Will elevators need to be taken out of service during installation?
Some work may require scheduled access or temporary interruptions. The contractors and building manager should coordinate the schedule and notify affected occupants.
What records should the building owner keep?
Keep approved plans, test results, inspection documentation, service records, and updated system drawings or records provided at project closeout.
Does Cyber Shield Security serve my area?
Cyber Shield Security serves Los Angeles and surrounding communities, including Pasadena, Arcadia, Burbank, Santa Monica, and West Hollywood. Contact the company to confirm availability for your property.
Contact Cyber Shield Security
Planning an elevator recall installation or fire alarm project? Contact Cyber Shield Security to discuss your building, project scope, and next steps for a property in Los Angeles or a nearby community.
Call (310) 242-3100 or email info@cybershieldsecurity.us.


