top of page
Search

When Does an Elevator Recall System Need to Be Installed or Updated?

Writer: Michael S.
Michael S.
Oct 26
5 min read


An elevator recall system is generally needed when applicable building and fire codes require it for the building’s elevators. It may also need to be installed, modified, or retested during new construction, certain renovations, elevator modernization, fire alarm changes, or when an inspection identifies a problem.


Whether a particular building needs an upgrade depends on its design, elevator type, project scope, applicable code, and direction from the local authority having jurisdiction (AHJ). Property owners should coordinate the elevator contractor and fire alarm provider before making changes.




What an Elevator Recall System Does


Elevator recall is a fire-safety function. When a qualifying fire alarm signal activates, the system directs affected elevators to a designated landing and takes them out of normal service. California regulations describe Phase I emergency recall as automatic or manual elevator recall to a specific landing after firefighters’ service is activated. California Code of Regulations, Title 8, Section 3009

The exact response depends on the building’s approved design and elevator controls. Elevator recall is not the same as using an elevator to evacuate occupants.



When a System May Need to Be Installed



New construction or a change in building use


New buildings may need elevator recall and related fire alarm functions based on their design and applicable code requirements. Changes in occupancy, building layout, or elevator use can also prompt a review by the design team and AHJ.



A building or elevator modernization project


Elevator modernization can affect controls and interfaces that are part of fire service operation. Before work begins, the elevator contractor and fire alarm provider should coordinate the project scope and determine whether plans, permits, or approvals are needed.



Fire alarm installation or major changes


Adding or relocating devices, replacing a control panel, changing elevator lobby detection, or modifying control wiring can affect elevator recall. The project team should confirm whether revised plans and testing are required before the system is changed.


Requirements vary by jurisdiction and building. California’s Fire Code requires fire protection systems to be maintained in operable condition and requires acceptance testing for new installations. 2025 California Fire Code, Chapter 9



When an Existing System May Need an Update


An existing system may need service or upgrades if testing identifies a failure, components are replaced, system changes affect the approved sequence, or the AHJ directs corrective work.



Testing identifies a problem


If a test shows that recall does not operate as designed, the issue should be reviewed by qualified elevator and fire alarm professionals. They can identify whether the cause is in a detector, wiring, control equipment, programming, or elevator interface.



Equipment is replaced or becomes unsupported


Replacement parts or control equipment may not work with the existing design without additional changes. Confirm compatibility and required approvals before installing substitute components.



Renovations affect devices, wiring, or building layout


Tenant improvements, lobby renovations, elevator work, or changes to fire alarm equipment can affect device locations and the approved sequence of operation. Review proposed changes with the project team and AHJ to determine whether a revision is needed.


An existing building is not necessarily required to receive a complete system replacement simply because codes have changed. Whether an upgrade is required depends on applicable code provisions, project scope, existing conditions, and AHJ direction.



How to Tell Whether Your Building Needs Work


Start by reviewing the building’s approved fire alarm and elevator documents, recent inspection reports, and any planned construction. Then ask the elevator contractor, fire alarm provider, and AHJ to clarify what is required for the specific property.


Useful questions include:


  • Is elevator recall required for this building and elevator configuration?

  • Are the existing plans and sequence of operation available?

  • Have recent tests found deficiencies?

  • Will planned elevator or fire alarm work affect recall?

  • Are permits, revised plans, or acceptance tests required?

  • Which contractors need to coordinate the work?



Coordinate the Elevator and Fire Alarm Contractors


Elevator recall involves connected systems, so the elevator contractor and fire alarm provider should agree on responsibilities, scheduling, and testing. Property managers should also coordinate access, tenant notices, elevator availability, and any inspection dates.


After work is complete, retain updated plans, test results, and required closeout documents. California’s Fire Code requires acceptance testing upon completion of covered installations and documentation that the system was installed and tested in accordance with approved plans and specifications. 2025 California Fire Code, Chapter 9



Why Choose Cyber Shield Security?


Cyber Shield Security works with property owners, managers, developers, and contractors on fire alarm system projects. For elevator recall work, early coordination can help identify how the fire alarm system interfaces with elevator controls and what questions should be resolved before installation or upgrades begin.


Cyber Shield Security serves Los Angeles and surrounding communities, including North Hollywood, Studio City, Burbank, Sierra Madre, Arcadia, Pasadena, Woodland Hills, Sherman Oaks, Santa Monica, Beverly Hills, and West Hollywood. Requirements differ by jurisdiction, so the project team should confirm the process for the building’s location.



Frequently Asked Questions



Does every elevator need a recall system?


Requirements depend on the building, elevator, applicable code, and AHJ. Have the specific property reviewed rather than assuming all elevators have identical requirements.



What triggers elevator recall?


A qualifying fire alarm input or manual fire service control may initiate recall, depending on the approved system design. The response sequence should be confirmed from the building’s plans and tested by qualified professionals.


Does an old building automatically need a new elevator recall system?


Not necessarily. Whether an existing building must be upgraded depends on applicable requirements, building conditions, renovation scope, and AHJ direction.



Does elevator modernization require fire alarm changes?


It may. Modernization can affect elevator controls and fire alarm interfaces. Coordinate with the elevator contractor, fire alarm provider, and AHJ to determine what changes, approvals, and tests are needed.



Who installs an elevator recall system?


The work may involve both an elevator contractor and a qualified fire alarm provider. Their responsibilities should be coordinated based on the design, scope, and local requirements.



Does elevator recall mean occupants should evacuate using the elevator?


No. Elevator recall is a fire-service function that directs elevators to a designated landing and removes them from normal service. Occupants should follow the building’s emergency procedures and posted instructions.



What should building owners keep after an update?


Keep approved plans, permit records, test results, updated drawings, and required closeout documents. Ask the project team what records the AHJ requires.



Contact Cyber Shield Security


If you own or manage a property in Los Angeles or the surrounding area and are planning elevator or fire alarm work, contact Cyber Shield Security to discuss the fire alarm scope and coordination needs.


Call (310) 242-3100 or email info@cybershieldsecurity.us. Share the property location, elevator project details, and any recent inspection findings.


Plan elevator recall work with the right system information and project coordination. Contact Cyber Shield Security to get started.

 
 
bottom of page