Who Should Property Managers Contact When a Fire Alarm System Goes Down?

When a fire alarm system goes down, property managers should promptly contact the building’s fire alarm service provider and follow the property’s impairment procedures. If the system or part of it is impaired, notify the authority having jurisdiction (AHJ) and other parties required by the building’s procedures or local code. The right contacts depend on the cause, how much protection is affected, and the AHJ’s direction.
Do not assume a trouble signal means the entire system has failed—or that it is safe to ignore. Ask a qualified fire alarm professional to assess the condition and explain what is affected.

Who to Contact First
1. The fire alarm service provider
Call the company responsible for inspecting or servicing the system. Give them the building address, panel information if available, the exact signal or message displayed, when it began, and any recent work or power interruptions. Follow the provider’s instructions and do not reset, silence, or disconnect equipment unless directed by a qualified professional.
2. The building’s impairment coordinator
The property owner should have a designated impairment coordinator. In California, the owner is considered the impairment coordinator if no specific person has been assigned. This person coordinates notifications, evaluates the affected areas, tracks temporary measures, and records when protection is restored.
3. The local fire department or AHJ
Follow the property’s procedures and contact the local fire department or AHJ when required. The AHJ can clarify notification, fire watch, and other temporary safety requirements for the specific building and impairment.
4. Monitoring provider and other affected parties
If the fire alarm is monitored, notify the supervising station as appropriate and confirm whether alarm, supervisory, or trouble signals are being received. Also notify building ownership, onsite staff, security, tenants, and the insurance carrier when required by the impairment plan or local direction.
California’s Fire Code describes impairment procedures that include determining the scope and duration, assessing increased risk, notifying relevant parties, and tagging affected equipment. It also calls for verification and notifications when the system is restored. Follow the applicable code and the AHJ’s direction for your property. 2025 California Fire Code, Chapter 9
What Property Managers Should Do While Waiting for Service
Confirm what is affected
Record the panel message, indicators, affected zones or devices, and the time the issue started. Do not assume a single trouble signal means total system failure; have the service provider determine the condition and extent.
Follow impairment procedures
If fire protection is impaired, follow the building’s written procedures and the AHJ’s instructions. These may include notifying occupants or staff, posting impairment tags, or arranging a fire watch if required. Do not assume a fire watch is always required or decide on a plan without checking the applicable direction.
Keep a communication and action log
Document who was contacted, when they were notified, the instructions received, service dispatch details, and any temporary measures. This record helps management coordinate the response and verify that each required step is completed.
What to Tell the Service Provider
To help the technician respond, share:
Property address and building type
Fire alarm panel make and model, if known
Exact panel message or indicator
Whether the signal affects one zone, multiple areas, or the whole system
Any recent electrical, construction, or fire alarm work
Building access requirements and onsite contact details
Any AHJ instructions or impairment actions already taken
Avoid troubleshooting the panel yourself. Fire alarm systems are life-safety equipment, and unqualified adjustments can create additional problems or obscure the original condition.
When the System Is Restored
Ask the service provider to explain what was repaired and what testing was completed. Update the building’s records and notify the fire department, monitoring provider, staff, insurer, or other parties as required by the impairment plan and AHJ. Remove impairment tags only when directed and after required restoration steps are complete.
California’s Fire Code includes checking that necessary inspections and tests were conducted and advising relevant parties when impaired equipment returns to normal operation. California Fire Code restoration procedures
Why Choose Cyber Shield Security?
Cyber Shield Security works with property owners and managers on fire alarm system service and project needs. When a system goes down, clear communication helps identify what is affected, coordinate access, and plan the repair and follow-up verification.
Property managers in Los Angeles and nearby communities—including North Hollywood, Studio City, Burbank, Sierra Madre, Arcadia, Pasadena, Woodland Hills, Sherman Oaks, Santa Monica, Beverly Hills, and West Hollywood—can contact Cyber Shield Security to discuss their fire alarm system needs.
Frequently Asked Questions
Who should I call first when a fire alarm system goes down?
Contact the building’s fire alarm service provider and the impairment coordinator. Follow the property’s impairment plan for notifying the AHJ, monitoring provider, and other parties.
Should I call 911 for a fire alarm trouble signal?
A trouble signal is not necessarily an emergency alarm. Follow the building’s emergency procedures and the panel instructions. If there is smoke, fire, or immediate danger, call 911.
Does a trouble signal mean the entire fire alarm system is down?
Not always. The signal may indicate a fault affecting one device or part of the system. A qualified fire alarm professional should determine the cause and extent.
Is a fire watch required when the alarm system is impaired?
It depends on the building, the extent of the impairment, and the AHJ’s direction. Ask the local fire department or AHJ what temporary measures are required.
Should the monitoring company be notified?
If the system is monitored, contact the supervising station as appropriate and confirm what signals are being received. Follow the property’s impairment procedures and the service provider’s guidance.
Can property staff reset or silence the fire alarm panel?
Staff should not reset, silence, or disconnect the system unless the building’s procedures and a qualified professional direct them to do so. Record the displayed message and contact the service provider.
What information should I give the technician?
Provide the building address, panel message, time the issue began, areas affected, recent work, access instructions, and onsite contact information.
How do I confirm the system is back in service?
Request documentation of the repair and testing performed. Follow the impairment plan and AHJ instructions for notifying parties and removing tags.
Contact Cyber Shield Security
If you manage a property in Los Angeles or the surrounding area and need help with a fire alarm system issue, contact Cyber Shield Security at (310) 242-3100 or info@cybershieldsecurity.us. Share the building location, panel message, and any known impairment details so the team can discuss next steps.
Keep your response organized and your property team informed. Contact Cyber Shield Security to discuss fire alarm service for your building.


